Creality Hi Combo 3D Printer Enclosure Kit - Entry Level Starter kit
PRODUCT PAGE DESCRIPTION
Creality Hi Entry Level Enclosure Starter Kit — The no-excuses way to enclose your Hi.
The Creality Hi is one of the best printers to come out in a while. 500mm/s, all-metal frame, multi-color with the CFS, and it runs at 48dB. Creality did their homework on this one. But it's still an open-frame printer sitting on your desk pushing fumes into your workspace.
This starter kit fixes that. Tailor fit to the Creality Hi, budget friendly, and made in the USA. Laser-cut acrylic panels that actually fit — not a grow tent you wrestled off Amazon that looks like you're hiding something illegal in your office.
Why this kit exists
The Hi is already a great value printer. We didn't want to ruin that by making you spend half the printer's cost on an enclosure. This is the stripped-down, essentials-only version — the same quality acrylic and hardware we use in everything we build, just without the extras. You can always add those later.
- Fume and particle containment — PLA smells fine until you're running it 10 hours a day. PETG, ASA, ABS? You need containment. An enclosure keeps the off-gassing out of your breathing space. This matters especially if you're printing in a bedroom, office, or shared space.
- Noise reduction — 48dB is already quiet, but enclosed it's borderline silent. Run overnight prints, run during meetings, run while your kid naps. Nobody's going to notice.
- Temperature stability — Consistent chamber temp means fewer warps, better adhesion, and more reliable long prints. If you've ever come back to a 14-hour print that curled off the bed at hour 11, you know the pain.
- Dust and debris protection — Keeps cat hair, sawdust, and whatever else is floating around out of your print zone.
SIZE - Creality Hi Combo - 19.5" Wide x 25.5" Deep x 21" Tall
Assembly Instructions
General Enclosure Walkthrough
Air Filter Options
What's in the box
- Laser-cut acrylic panels — 1/8" thick, optically clear front panel for full visibility. 5-sided design.
- All hardware — Screws, nuts, connectors. No hardware store runs.
- Printable STL files — Brackets and fittings you print on the Hi itself. Files are pre-sliced and ready to go. Good first project for the machine.
- Filament feed-through port — Wide enough for your CFS lines to route cleanly into the enclosure.
- Cable routing grommet — Power and USB routed neatly. No janky cable management.
- Expandable — Ports for exhaust fan, carbon filter, camera. Add what you want, when you want.
Enclosure dimensions: 19.5" Wide x 25.5" Deep x 21" Tall. No permanent mods to your printer. Print the parts, assemble, done.
About us
Small business out of Rocklin, California. Made in the USA. We've been building enclosures since 2020 for hobbyists, makerspaces, universities, and Fortune 500 companies. 100% satisfaction guarantee and a 1-year warranty against manufacturer defects.
We build these because we use them. Questions? We actually respond.
Need more information on printing with enclosures? Check these links:
- Benefits of printing with an enclosure
- 3D printing health Government guidelines
- Additional Health studies
- Getting Better prints with an enclosure
FAQ
What is your return Policy?
We have a 30 day return policy. Unused, undamaged panels that still have the masking fully attached are eligible for a full refund less return shipping. If panels are damaged (after shipment) or the protective mask layer has been removed, we cannot offer a refund. For best results in ensuring fitment and to ensure you like the setup of our enclosures consider at least partially assembling with the mask on. If you find out it isn't for you, this allows to get the return for a full refund.
There are some differences between your product pictures.
We update these often and as a small business it isn't realistic to do a fresh photoshoot for every iteration. In general function is always constant or better as we improve things. For the clearest indication of our current version, please rely on the renderings rather than the photos.
Original: $189.89
-65%$189.89
$66.46Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PRODUCT PAGE DESCRIPTION
Creality Hi Entry Level Enclosure Starter Kit — The no-excuses way to enclose your Hi.
The Creality Hi is one of the best printers to come out in a while. 500mm/s, all-metal frame, multi-color with the CFS, and it runs at 48dB. Creality did their homework on this one. But it's still an open-frame printer sitting on your desk pushing fumes into your workspace.
This starter kit fixes that. Tailor fit to the Creality Hi, budget friendly, and made in the USA. Laser-cut acrylic panels that actually fit — not a grow tent you wrestled off Amazon that looks like you're hiding something illegal in your office.
Why this kit exists
The Hi is already a great value printer. We didn't want to ruin that by making you spend half the printer's cost on an enclosure. This is the stripped-down, essentials-only version — the same quality acrylic and hardware we use in everything we build, just without the extras. You can always add those later.
- Fume and particle containment — PLA smells fine until you're running it 10 hours a day. PETG, ASA, ABS? You need containment. An enclosure keeps the off-gassing out of your breathing space. This matters especially if you're printing in a bedroom, office, or shared space.
- Noise reduction — 48dB is already quiet, but enclosed it's borderline silent. Run overnight prints, run during meetings, run while your kid naps. Nobody's going to notice.
- Temperature stability — Consistent chamber temp means fewer warps, better adhesion, and more reliable long prints. If you've ever come back to a 14-hour print that curled off the bed at hour 11, you know the pain.
- Dust and debris protection — Keeps cat hair, sawdust, and whatever else is floating around out of your print zone.
SIZE - Creality Hi Combo - 19.5" Wide x 25.5" Deep x 21" Tall
Assembly Instructions
General Enclosure Walkthrough
Air Filter Options
What's in the box
- Laser-cut acrylic panels — 1/8" thick, optically clear front panel for full visibility. 5-sided design.
- All hardware — Screws, nuts, connectors. No hardware store runs.
- Printable STL files — Brackets and fittings you print on the Hi itself. Files are pre-sliced and ready to go. Good first project for the machine.
- Filament feed-through port — Wide enough for your CFS lines to route cleanly into the enclosure.
- Cable routing grommet — Power and USB routed neatly. No janky cable management.
- Expandable — Ports for exhaust fan, carbon filter, camera. Add what you want, when you want.
Enclosure dimensions: 19.5" Wide x 25.5" Deep x 21" Tall. No permanent mods to your printer. Print the parts, assemble, done.
About us
Small business out of Rocklin, California. Made in the USA. We've been building enclosures since 2020 for hobbyists, makerspaces, universities, and Fortune 500 companies. 100% satisfaction guarantee and a 1-year warranty against manufacturer defects.
We build these because we use them. Questions? We actually respond.
Need more information on printing with enclosures? Check these links:
- Benefits of printing with an enclosure
- 3D printing health Government guidelines
- Additional Health studies
- Getting Better prints with an enclosure
FAQ
What is your return Policy?
We have a 30 day return policy. Unused, undamaged panels that still have the masking fully attached are eligible for a full refund less return shipping. If panels are damaged (after shipment) or the protective mask layer has been removed, we cannot offer a refund. For best results in ensuring fitment and to ensure you like the setup of our enclosures consider at least partially assembling with the mask on. If you find out it isn't for you, this allows to get the return for a full refund.
There are some differences between your product pictures.
We update these often and as a small business it isn't realistic to do a fresh photoshoot for every iteration. In general function is always constant or better as we improve things. For the clearest indication of our current version, please rely on the renderings rather than the photos.
